COSMOS MRO Zinc Galva

• 99% purity of zinc
• Quick Drying
• Excellent Adhesion
• High Coverage
• Rust Resistant Formulation

• Construction equipment
• Structural steel
• Guard rails
• Welding seams
• Pipes and fittings
• Lamp posts
• Crash barriers
• Power transmission towers
• Railway electrification supports
• Security fencing
• Trailers
• Solar panels
• AC units

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.

• Ensure the surface is clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.
• Wear protective gloves, protective clothing, eye/face protection.
• Always paint in an open space in the open air.
• Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly.
  Spray surface from a distance of 25-30cms.
• Paint first vertically and then horizontally.
• Apply Zinc Spray in several thin layers to avoid overapplication. Before each layer, shake the spray can well. Once the spray dries, a primer and a lacquer can be applied.
• After use, clean the Zinc Spray valve (turn the aerosol upside down and press the nozzle for approx. 5 seconds). The drying time depends on ambient temperature, air humidity, and thickness of the lacquer applied.