COSMOS LAC Master Mechanic N11 BUMPER PAINT

• Colour: Black
• Renews and protects weathered or discoloured bumpers & mouldings
• OEM colour match
• No primer need
• Do not crack and withstand stresses and damage from gravel
• High weather resistance & colour stability
• Long-lasting shine and colour
• Keeps the bumper’s original structure
• Scratch and shockproof
• Easy to use
• Excellent coverage
• Excellent adhesion
• Viscosity: 18-25 sec
• Density: 0.6-0.8 g/L
• Drying time: Touch (20°C, Humidity<65%): 5-10min,
  Through dry (20°C, Humidity <65%): 1h, Maximum hardness: 24h
• Coverage: 5m2/L
• Made in Europe
• 500ml

• SMART CAP
  
  – Less overspray
  – Extreme coverage
  – Fast drying
  – Hard chisel lines
  – Even coating
  – Suitably for effects
  – Dual way spraying

It can be used to repair and improve plastic bumpers while still maintaining the original structure suitable for decorative indoor uses. Gives synthetic surfaces a silky shine. Ideal for hard plastic surfaces, and for protecting the lower part of the car body from salt, bumps, and moisture.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-32°C and humidity below 65% to ensure proper drying. Do not use on objects that may exceed 90°C surface temperature. Storage 10-30°C.

• Ensure the surface is clean, dry, and free of grease
• Wear protective gloves, protective clothing, eye/face protection
• Always paint in an open space in the open air
• The space should be as dust-free as possible
• Protect the surrounding area from overspray
• Test spray on a non-visible area
• Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
• Spray surface from a distance of 25cm
• Apply in several thin layers, spraying in sweeping motions
• After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)