COSMOS LAC Master Mechanic N12 HEAT RESISTANT BLACK

• Colour: Black
• High temperature paint (with resistance up to 700°C)
• Excellent adhesion
• High resistance to oxidizing agents
• High coverage capacity
• Matt finish
• Drying time: Touch (20°C, Humidity<65%): 5-10min,
  Through dry (20°C, Humidity <65%): 1h, Maximum hardness: 24h
• Coverage: 5m2/L
• Made in Europe
• 500ml

• SMART CAP
  
  – Less overspray
  – Extreme coverage
  – Fast drying
  – Hard chisel lines
  – Even coating
  – Suitably for effects
  – Dual way spraying

Ideal to paint and renew surfaces such as stoves, burners, exhausts and generally all iron surfaces that reach high temperatures.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use, spray it in the air for 3-4 seconds to remove any condensed colour. After use, turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% ensures proper drying. Storage 05-35°C.

• Choose a well-ventilated area and place the object you want to paint over a nylon protection sheet
• Always wear protective gloves, protective clothing, eye/face protection
• Ensure that the surface you want to paint is clean, dry, and free of loose spots or grease
• Mask areas that you do not want to be painted with a paper tape
• Apply two coats of the RAL line with relatively quick movements from 25-30cm distance
• Paint first vertically and then horizontally (this is one coat). Wait 3-5 minutes before painting the next coat