COSMOS LAC Master Mechanic N05 PLASTIC PRIMER

• Colour: Transparent
• A quick drying primer for the perfect pre-treatment of plastic surfaces
• Improves the adhesion of the top coat on plastic surfaces
• High filling power
• Improves the gloss level of the topcoat
• Solvent-based product with special adhesion-promoting additives
• Suitable for indoors and outdoors applications
• Good resistance to outside influences
• Good flow, smooth surface
• Easily applied
• Viscosity: 18-25 sec
• Density: 0.6-0.8 g/L
• Drying time: Touch (20°C, Humidity<65%): 5-10min,
  Through dry (20°C, Humidity <65%): 1h, Maximum hardness: 24h
• Coverage: 3m2/L
• Made in Europe
• Contents: 500ml

• SMART CAP
  
  – Less overspray
  – Extreme coverage
  – Fast drying
  – Hard chisel lines
  – Even coating
  – Suitably for effects
  – Dual way spraying

Is the perfect bonding agent for the final varnishing of car plastic parts. Suitable for garden furniture and other objects of coat-able hard plastics.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use hold the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 5-35°C.

- Ensure the surface is clean, dry and free of grease- Wear protective gloves, protective clothing, eye/face protection- Always paint in an open space in the open air- The space should be as dust-free as possible- Protect the surrounding area from overspray. Before you are ready to prime, you need to protect your tire and valve stem from overspray. The easiest way to do this is with painter’s tape and newspaper or plastic or a stack of index cards- Sand back with a fine-grit sandpaper and carefully remove all residue afterwards- Test spray on a non-visible area- Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly- Spray surface from a distance of 25-30cm- Paint first vertically and then horizontally- Apply Primer in several thin layers, spraying in sweeping motions- Allow each coating to dry for at least 5 minutes- Can be overpainted after 3 hours- Immediately after applying your final coat, carefully remove the painter’s tape and index cards from the surface. Then, wait for the paint to dry to the touch before carefully removing the garbage bags- After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)