COSMOS LAC RAL Line Metallics

• Extraordinary gloss
• 100% acrylic resin
• With a new safety lid
• The only industrial paint with a variable smart jet actuator
• RAL accuracy for all colours
• Low odour
• Fast drying
• Excellent elasticity
• Easy to apply and recoat
• Exceptional adhesion
• High weather resistance and colour stability
• Rust preventative
• Fade and chip resistant
• Does not contain lead
• With an awarded design where each colour shade has its unique container
• 400ml

SMART CAP

– Less overspray
– Extreme coverage
– Fast drying
– Hard chisel lines
– Even coating
– Suitably for effects
– Dual way spraying

Ideal for DIY and professional use on most surfaces: wood, metal, stainless steel, glass, ceramics, stone, fabric, paper, and others.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use, spray it in the air for 3-4 seconds to remove any condensed colour. After use, turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Select the valve according to your desired application, the black valve system for wide spray and large surfaces or the white actuator for fine spray, small surfaces, and details. Optimal application at temperature: 10-25°C and humidity below 65% ensures proper drying. Storage 05-35°C.

• Choose a well-ventilated area and place the object you want to paint over a protection sheet like newspaper, cardboard or a nylon sheet.
• Always wear protective gloves, protective clothing, eye/face protection.
• Ensure that the surface you want to paint is clean, dry, and free of loose spots or grease.
• Mask areas that you do not want to be painted with a paper tap.
• Apply two coats of the RAL line with relatively quick movements from 25- 30cm distance.
• Paint first vertically and then horizontally (this is one coat). Wait 10 minutes before painting the next coat.