COSMOS LAC Metal Varnish

• Increases the brilliance of colour layers
• Weather and light resistant, UV-resistant, extends the life of works of art
• After drying, scratch, impact and shock resistant
• Very good adhesion
• Fixes grasses, straw and dried flowers
• Protective coating for works of art or wood, cardboard
• Oxidation protection for metal effect paint (different degrees of gloss)
• 400ml

SMART CAP

– Less overspray
– Extreme coverage
– Fast drying
– Hard chisel lines
– Even coating
– Suitably for effects
– Dual way spraying

Protects against erosions and beautifies any metal surface such as bronze, copper, tinplate, etc. Ideal for the final protecting layer on car paints.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 5-35°C.

• Ensure the surface is clean, dry, and free of grease
• Wear protective gloves, protective clothing, eye/face protection
• Always paint in an open space in the open air
• The space should be as dust-free as possible
• Protect the surrounding area from overspray
• Test spray on a non-visible area
• Rust spots should be completely removed and filled if necessary before varnishing
• Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
• Spray surface from a distance of 25-30cm
• Apply in several thin layers, spraying in sweeping motions
• Don't go over bits you have missed, but leave to dry and then re-varnish area. Don't go back over areas you have already done, as this can cause clouding
• Don't attempt to remove once applied
• After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)