COSMOS LAC Chalk Varnish

• Ultra-Matte Effect Varnish
• 100% acrylic resin
• Low odour
• Extreme coverage
• Fast drying
• Doesn’t drip
• Easy to apply and re-coat
• High weather resistance and colour stability
• Contents: 400ml

SMART CAP

– Less overspray
– Extreme coverage
– Fast drying
– Hard chisel lines
– Even coating
– Suitably for effects
– Dual way spraying

Ideal for DIY and professional use on most surfaces: wood, metal, stainless steel, glass, ceramics, stone, fabric, paper, and others.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use, spray it in the air for 3-4 seconds to remove any condensed colour. After use, turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Select the valve according to your desired application, the black valve system for wide spray and large surfaces or the white actuator for fine spray, small surfaces, and details. Optimal application at temperature: 10-25°C and humidity below 65% ensures proper drying. Storage 05-35°C.

• Choose a well-ventilated area and place the object you want to paint over a nylon protection sheet
• Wear protective gloves, protective clothing, eye/face protection
• Ensure that the surface you want to paint is clean, dry, and free of loose spots or grease
• Old wooden furniture may have been polished with wax. If so, use a wire sponge with white spirit to clean it before painting. For painted wood ideally sand it before painting it with a P180 sandpaper
• Mask areas that you do not want to be painted with a paper tape
• Apply two coats of the Chalk Effect Varnish with relatively quick movements from 25-30cm distance. Paint first vertically and then horizontally. Wait 5-10 minutes before painting the next coat.