COSMOS LAC Alu Zinc

• Creating a zinc-rich coating
• Good electricity conductor
• Fast drying
• Good filling
• Anticorrosive properties
• Outstanding catholic corrosion prevention
• Resistance to petrol, chemicals, and weather influences
• Spot-weldable
• Excellent adhesion
• Resistance to high temperatures and heat
• 400ml

STANDARD CAP

-No Drips-High Coverage-Gradual Spraying-Thin & Regular

Suitable for DIY or professional use. Ideal for the protection of welds, piping, tanks, and all metal structures exposed to corrosive agents. Proper for repairing galvanized surfaces.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.

• Ensure the surface is clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.
• Wear protective gloves, protective clothing, eye/face protection. Always paint in an open space in the open air.
• Always spray with the can in a vertical position, otherwise the paint might spread unevenly.
• Spray surface from a distance of 25-30cms.
• Paint first vertically and then horizontally.
• Apply Zinc Spray in several thin layers to avoid overapplication. Before each layer, shake the spray can well. Once the spray dries, a primer and a lacquer can be applied.
• After use, clean the Zinc Spray valve (turn the aerosol upside down and press the nozzle for approx. 5 seconds). The drying time depends on ambient temperature, air humidity, and thickness of the lacquer applied.