We have often seen that our old paint bottles dry up, and the nozzle of our spray cans gets clogged. Purchasing a new spray paint can each time the nozzle clogs is a frustrating solution. In this blog we will share with you a guide about how to take care of your Cosmos spray paints after using them and how to avoid clogged nozzles by turning the can upside down and spray it into the air ensuring the nozzle is passing only gas and embrace your artistic side any time you want.
Why do spray paint nozzles get clogged?
Spray Paints nozzles are known to have narrow openings, which can lead to a buildup of an unclear valve, making it clogged. A few key reasons for spray paint can nozzles getting clogged are:
-
Dried up residual paint: One can turn the nozzle upside down and continuously spray for 5-10 seconds until you see clear material or the paint coming out. This makes sure that nozzle can have no residual paint.
-
Inadequate mixing of the content inside can make the nozzle stem clogged.
-
Temperature: Cold temperatures can make the paint thick, which can lead to a clogged nozzle.
-
Dust: A lot of times, the nozzles are exposed to dust and debris, which can lead to clogging of the nozzle.
How to unclog a nozzle?
It is always advisable to know how to unclog a nozzle and save money by getting it cleaned. While cleaning a nozzle might sound technical and a difficult task, much to the contrary, it is quite simple and effective. Here are a few steps on how you can clean the nozzle.
-
Shake the can well: There are times when minute particles deposit themselves in the nozzle. Shaking the can vigorously can help in getting rid of the particles ensuring an unclogged nozzle. Also turn the can upside down and continuously spray the can for 5 to 10 seconds and ensure that the can is empty of residual paint clogging the nozzle.
-
Inspect the nozzle: The nozzle can be cleaned by removing it from the can and wiping the residue of the paint. Sometimes it can be unclogged by wiping it with a warm cloth, too.
-
Clean the nozzle: The nozzle can be cleaned in several ways, such as using a pin to get the residual paint out or even soaking the nozzle in warm water to clean it.
-
Reattach the nozzle and do a patch test: If you think the nozzle has been cleaned, attach it back to the can and do a patch test to allow smooth flow of the paint from the nozzle.
What are a few tips to avoid a clogged nozzle?
While cleaning the nozzle is effective, one should always remember that a clogged nozzle can be avoided by following some basic tips. Here are a few tips to avoid a clogged nozzle:
-
Wipe the nozzle clean after using it to avoid paint from drying in the nozzle. Turn the can upside down and spray it in the air for around 15 seconds, once the paint has been removed, only gas will pass ensuring the nozzle is clean and will not get clogged.
-
Ensure the paint does not thicken and always store the Cosmos Paints aerosol spray in a cool temperature to avoid a clogged nozzle.
-
Shaking the can thoroughly can clear the nozzle from dust and debris, allowing a smooth flow of paint.
Why pick Cosmos Paints?
Cosmos Paints is known for its convenience, quality, and uniform results. The range of Cosmos Paints has been crafted mindfully to offer satisfying results every time one uses them.