Whether you are giving new life to your old furniture, adding a pop of colour to your walls, or taking up a DIY project, the best results are always expected and appreciated. Spray paints are known for their convenience and instant results they provide.
Spray paints are immensely versatile, but without the right techniques, they can result in drips, a patchy finish, and blotchy messes visible on the surface. In this beginner’s guide to spray paint, we will guide you through the process of preparing the surface and applying spray paint professionally.
Why pick spray paints?
Spray paints deliver swift and excellent results. Spray paints are preferred over paint brush as the results are better. Spray paints cover areas faster and do not leave any mark of brush strokes and dry faster than regular paints and can be used on multiple surfaces such as wooden, plastic and even metal surfaces.
What are the basic requirements for spray painting?
Spray painting requires basic requirements that help in achieving a smooth and flawless finish. A few requirements for using best spray paints in India are the following:
-
Best spray paints for beginners from a trusted brand like Cosmos Paints
-
Sandpaper for evening out uneven surfaces
-
A high quality primer for ensuring the base is prepared and the paint can stick to the surface properly.
-
High quality masking tape to protect the furniture from excess spray paints
-
Gloves and mask to protect the face and hands from spray paint fumes.
Step-By-Step Guide On How To Use Spray Paint?
Surface Preparation
A beginner often skips this step and proceeds directly to spray painting the surface. Surface preparation includes:
-
Use a damp cloth to clean the surface of dirt, grease and dust.
-
Using sandpaper to chip out old paint and smoothen the surface.
-
Along with a sandpaper use a high quality primer such as COSMOS PAINTS Primer that can be applied on a variety of surfaces.
-
The primer needs to sit on the surface and allow its coating to be dried for a smooth finish.
Picking the right spray paint
Every surface requires different kinds of spray paints. It is important to know which surfaces are suited to diverse finishes.
Shake The Can
The most important step is to shake the can vigorously for a minute until you hear the ball click and then do a small patch test to ensure the paint is flowing smoothly through the nozzle.
Use The Right Spray Painting Technique
Spraying should be done at a proper angle and the can should be held 25 cms away from the surface. Always prefer the cross-hatch technique that ensures the entire surface is covered and there is no scope for drips or a patchy finish. Use sweeping strokes and thinner coats for a flawless finish.
Finish Spray Painting And Seal With A Clear Coat
Clear Coat Cosmos spray paints or top coats are usually applied over spray paint coats to prevent surface scratches and protect the surface from water and other external factors. It helps in increasing the longevity of the surfaces and protects it from daily wear and tear.
What are a few common mistakes beginners make while spray painting?
-
A few of those common mistakes are the following:
-
Skipping the preparation of the surface.
-
Using a clogged nozzle or not shaking the can enough.
-
Not masking the nearby surroundings and spray painting in unsuitable weather conditions.
-
Holding the can incorrectly and lacking knowledge of the correct distance between the surface and the spray can.
Conclusion
The right technique and proper surface preparation honour the skill of spray painting. In this blog of spray painting guide step by step we have walked you through the importance of prerequisites of spray painting and common mistakes that can be avoided for smooth & professional results.
FAQs
Q1. Do I need a primer before spray painting?
While many spray paints require you to use primer, products from Cosmos Lac products like chalk effect, easy max and flame are spray paints from Cosmos Paints, where using a primer is optional.
Q2. How long does it take for a coat to dry?
With ideal temperatures and breezy surroundings, a coat generally takes up to 5-10 minutes but for a professional finish we suggest allowing the surface to cure for 24 hours.
Q3. How to ensure spray paint nozzles are not clogged?
A3. After you finish using it, turn the can upside down and spray it in the air for around 15 seconds. Once the paint has been removed, only gas will pass ensuring the nozzle is clean and will not get clogged.