COSMOS PAINTS High Heat

Cosmos Paint High Heat line is acrylic based and offers real durability in temperatures up to 600 degrees Celsius. It’s a highly efficient and affordable way to paint and renew surfaces such as silencer, motor parts, boilers, coolers, exhausts and generally all iron surfaces that reach high temperatures. Available in 2 colours.

FEATURES

• High temperature paint (with resistance up to 600°C)
• Excellent adhesion
• High resistance to oxidizing agents
• 410 grams gross weight per 400 ml
• Shrink wrapped cans
• High pressure for quick application and high coverage
• Lead and CFC Free
• Economical
• Quick drying
• Excellent elasticity
• Easy to apply and recoat
• Drying time (1 coat, Temperature 20°C, Humidity <65%): 20-30 minutes
• Complete drying (1 coat, Temperature 20°C, Humidity <65%): 3 hours
• Repaint: 3 hours
• Available in 2 colours
• Available in 400ml

APPLICATION

Ideal to paint and renew surfaces such as silencer, motor parts, boilers, coolers, exhausts and generally all iron surfaces that reach high temperatures.

CAP SYSTEM

 – Wide spray
 – For Large Surfaces
 – Fast Application
 – No drips

INSTRUCTIONS FOR USE

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.

TIPS:

• Ensure the surface is clean, dry and free of grease.
• Wear protective gloves, protective clothing, eye/face protection.
• Always paint in an open space in the open air.
• Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly.
• Spray surface from a distance of 25-30cms
• After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds). Use nitro solvent to clean tools
• Paint first vertically and then horizontally.
• After the first coat of paint, gradually heat the surface to 250°C for 45 minutes to achieve a hardening of the paint. Smoke is likely to form when the paint hardens.

CAUTION: This paint is NOT suitable for surfaces in direct contact with flame