Rs. 740.00 Sale Save
Size 400ml

Cosmos MRO Zinc Galva is zinc concentrate formulated (99% zinc purity) to protect and prevent rust & weathering which increases the lifespan of the surface. It is free of chlorinated solvents. Cosmos Zinc Galva is non-dripping with great adhesion and has high resistance to atmospheric agents, washing, oxidation of salty fog, seams, pipes and fittings (Solar Panels & AC outdoor units). The weathering aspect equals hot dip galvanization, making Zinc Galva one of the best touch up products for damaged galvanization. It has great temperature resistance; layer coating resistance from -50℃ to +250℃ (Metallic powder resists until 700℃).


  • 99% purity of zinc
  • Quick Drying
  • Excellent Adhesion
  • High Coverage 
  • Rust Resistant Formulation


  • Construction equipment
  • Structural steel
  • Guard rails
  • Welding seams
  • Pipes and fittings
  • Lamp posts
  • Crash barriers
  • Power transmission towers
  • Railway electrification supports
  • Security fencing
  • Trailers 
  • Solar panels
  • AC units


Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.


  • Ensure the surface is clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.
  • Wear protective gloves, protective clothing, eye/face protection.
  • Always paint in an open space in the open air.
  • Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly.
    Spray surface from a distance of 25-30cms.
  • Paint first vertically and then horizontally.
  • Apply Zinc Spray in several thin layers to avoid overapplication. Before each layer, shake the spray can well. Once the spray dries, a primer and a lacquer can be applied.
  • After use, clean the Zinc Spray valve (turn the aerosol upside down and press the nozzle for approx. 5 seconds). The drying time depends on ambient temperature, air humidity, and thickness of the lacquer applied.