COSMOS LAC Master Mechanic N10 RAL PAINT

Highly pigmented and fast drying acrylic paint in spray can specially formulated for use on vehicles, with high coverage and excellent adhesion. The line also includes a silver metallic aerosol paint for metal surfaces which are not rub resistant and not resistant to weather influences.

• Colours: Matte White, Gloss White, Silver, Matte Black, Gloss Black
• Extraordinary gloss/ matte effect
• 100% acrylic resin
• With a new safety lid
• The only industrial paint with a variable smart jet actuator
• RAL accuracy for all colours
• Low odour
• Fast drying
• Excellent elasticity
• Easy to apply and re-coat
• Exceptional adhesion
• High weather resistance and colour stability
• Rust preventative
• Fade and chip resistant
• Does not contain lead
• Viscosity: 18-25 sec
• Density: 0.6-0.8 g/L
• Drying time: Touch (20°C, Humidity<65%): 5-10min,
  Through dry (20°C, Humidity <65%): 1h, Maximum hardness: 24h
• Coverage: 5m2/L
• Made in Europe
• 500ml

Ideal for DIY or professional use on most surfaces: wood, metal, stainless steel, plaster, ceramics, stone, marble, and others.

CAP SYSTEM

• 
  SMART CAP

  – Less overspray
  – Extreme coverage
  – Fast drying
  – Hard chisel lines
  – Even coating
  – Suitably for effects
  – Dual way spraying

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use, spray it in the air for 3-4 seconds to remove any condensed colour. After use, turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% ensures proper drying. Storage 05-35°C.

TIPS:

• Choose a well-ventilated area and place the object you want to paint over a nylon protection sheet
• Always wear protective gloves, protective clothing, eye/face protection
• Ensure that the surface you want to paint is clean, dry, and free of loose spots or grease
• Mask areas that you do not want to be painted with a paper tape
• Apply two coats of the RAL line with relatively quick movements from 25-30cm distance
• Paint first vertically and then horizontally (this is one coat). Wait 3-5 minutes before painting the next coat