COSMOS LAC Master Mechanic N11 BUMPER PAINT
Acrylic based paint for repairing and renewing all hard plastic automotive surfaces e.g., bumpers. It has excellent adhesion and coverage maintaining the original structure of the bumper, making it look new after spraying.
FEATURES
- Colour: Black
- Renews and protects weathered or discoloured bumpers & mouldings
- OEM colour match
- No primer need
- Do not crack and withstand stresses and damage from gravel
- High weather resistance & colour stability
- Long-lasting shine and colour
- Keeps the bumper’s original structure
- Scratch and shockproof
- Easy to use
- Excellent coverage
- Excellent adhesion
- Viscosity: 18-25 sec
- Density: 0.6-0.8 g/L
- Drying time: Touch (20°C, Humidity<65%): 5-10min,
Through dry (20°C, Humidity <65%): 1h, Maximum hardness: 24h - Coverage: 5m2/L
- Made in Europe
- 500ml
APPLICATION
It can be used to repair and improve plastic bumpers while still maintaining the original structure suitable for decorative indoor uses. Gives synthetic surfaces a silky shine. Ideal for hard plastic surfaces, and for protecting the lower part of the car body from salt, bumps, and moisture.
CAP SYSTEM
-
SMART CAP– Less overspray
– Extreme coverage
– Fast drying
– Hard chisel lines
– Even coating
– Suitably for effects
– Dual way spraying
INSTRUCTIONS FOR USE
Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-32°C and humidity below 65% to ensure proper drying. Do not use on objects that may exceed 90°C surface temperature. Storage 10-30°C.
TIPS:
- Ensure the surface is clean, dry, and free of grease
- Wear protective gloves, protective clothing, eye/face protection
- Always paint in an open space in the open air
- The space should be as dust-free as possible
- Protect the surrounding area from overspray
- Test spray on a non-visible area
- Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
- Spray surface from a distance of 25cm
- Apply in several thin layers, spraying in sweeping motions
- After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)