COSMOS LAC Master Mechanic N13 ANTIGRAVEL Underbody Coat

Protective undercoat spray based on synthetic resins and rubber. Quick dry, anticorrosive, texture surface which protects the lower part of the car body from salt, bumps, and moisture. Soundproofing material for lower car body. Can be overpainted. High protection from stone chips and weathering especially from rains in monsoon.

• Colour: Black
• Resistant to high temperatures
• Strong insulation
• Elastic textured finish
• Fast over paintable
• Excellent stone chip, weathering and corrosion resistant
• High performance
• Excellent sag resistance
• Sound deadening
• Viscosity: 25-35 sec
• Density: 1.0 ±0.03 g/L
• Drying time: Touch (20°C, Humidity<65%): 10-15min,
  Through dry (20°C, Humidity <65%): 1h, Maximum hardness: 24h
• Coverage: 5m2/L
• Made in Europe
• 500ml

It can be used for underbody, wheel arches, front/rear valences, body sills, new parts and repair panels.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-32°C and humidity below 65% to ensure proper drying. Do not use on objects that may exceed 90°C surface temperature. Storage 10-30°C.
TIPS:

• Ensure the surface is clean, dry, and free of grease
• Wear protective gloves, protective clothing, eye/face protection
• Always paint in an open space in the open air
• The space should be as dust-free as possible
• Protect the surrounding area from overspray
• Test spray on a non-visible area
• Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
• Spray surface from a distance of 25-30cm
• Apply in several thin layers, spraying in sweeping motions
• After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)